VC 5AX Series
5-Axis Machining Centers

MORE COMPLEXITY? MORE TOOLS.
81-tool magazine is standard. But you can go higher.
The more complex the part, the more tools are required to get the job done right. The VC 5AX gives you 81 tools out of the box but offers options of up to 121 tools.

VC 5AX Lineup
Type of 5 Axis | Full 5 |
X Axis Travel | 25.6" |
Y Axis Travel | 30.1" |
Z Axis Travel | 20.5" |
X Axis Rapid Traverse | 1,575 ipm |
Y Axis Rapid Traverse | 1,575 ipm |
Z Axis Rapid Traverse | 1,417 ipm |
Cutting Feedrate | 1 - 709 ipm |
Rotary Table Diameter | 24.8" |
Maximum Table Capacity | 1,100 lbs |
Number of Tools STD | 81 |
Number of Tools OPT 1 | 121 |
Spindle Taper | CAT40 |
Spindle Power | 30 hp |
Spindle RPM | 12,000 RPM |
Spindle Torque | 150.4 ft-lb |
Power Transmission Type | Built-In |
Height | 130" |
Length | 180.5" |
Width | 126" |
Weight | 29,763 lbs |
DEPENDABLE CUTS
Ultra high speed spindles.
The VC 630/5AX has a built-in 12,000-RPM spindle that is supported by high precision ceramic bearings and monitored by a thermal sensor for micron level accuracy. Combined with a standard BIG-PLUS taper, you get more rigidity, less vibration and cuts you can rely on.
OPTIONAL PALLET CHANGER
For even more productivity.
If you want to multiply the productivity you get from your VC 630/5AX, a pallet changer version is available. It’s a configuration that will do absolute wonders for your bottom line and double your productivity.